The Ventrac 4500Y with a 25Hp all-wheel drive compact tractor with optional dual wheels is designed for adverse slopes and wet to soft ground conditions. It has over 30 attachments including mowers, power rakes and ground conditioners. Therefore our business can work effectively, safely and with the minimum of disturbance on all areas of your site.
Attachments can be changed very quickly. Easy to operate, with light steering making it possible to be almost inch perfect. It can operate on steep banks and ditches up to an angle of up to 30 degrees.
By using our all wheel-drive compact articulating tractor we aim to significantly reduce manual grass and scrub cutting with our slope mowers designed and approved to work on marginal terrain.
We can minimise risk and maximise output whatever the weather, vegetation and slope.
Ventrac’s compact frame is designed with a low centre of gravity to give the tractor superior stability on slopes, hugging the ground. The quick hydrostatic braking allows operators to confidently slow down, stop and reverse on hills.
Downhill braking: Quick hydrostatic bbraking allows operators to confidently slow down, stop and reverse on hills.
Hug the ground: Ventrac’s compact frame is designed with a low center of gravity to give the tractor superior stability on slopes.
Can cut the kind of areas other mowing machines cannot get to. The articulated nature of the machine allows it to cover undulating terrain very easily.
Excellent for grassland management, golf courses etc. Gives an excellent mown grass finish.
The compact machine is ideal to mow in tight areas with the floating wings able to adapt to the task at hand.
40 Degree Side Deck Motion: The Contour Deck flexes up to 20 degrees up or down (40 degree range).
Good for mowing steep banks and ditches and will operate on a slope of an angle of up to 30 degrees.
Scalp-Free Mowing: The independent decks follow the most challenging terrains with full-length rollers to prevent scalping of your course.
Great for mowing ditches, banks and swales:
- Good for pathways, tracks or poached areas.
- Takes out potholes and undulations in a track, helping to relevel and regrade the surface.
- Will do the work in a day which would take ten men to complete in a week.
- Minimises the need to use infill material
-Can cut the kind of areas other mowing machines cannot get to or through.
-The articulated nature of the machine allows it to cover undulating terrain very easily.
-Excellent for rough grassland management on field margins, overgrown banks or the rough on golf courses etc.
-Particularly good for inter-row mowing in new plantations as it can cope with woody shrubs as well as grass & weeds.
-Good for mowing steep banks and will operate on a slope of an angle of up to 30 degrees.
When turf compaction has been caused by pedestrian or vehicle traffic, sporting events or other events aeration of the turf may become necessary to keep it healthy.
Our Ventrac aeration system is designed to stir and loosen the soil beneath the sod without destroying the turf. Whilst the tines aerate the ground, the bar also vibrates to help break up the soil and loosen the roots beneath the surface for increased water and oxygen absorption.
These tines create a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Nine holes are created each foot (97 holes per square metre) and the hole size is regulated by drive-speed (the slower the drive speed, the larger the hole).
The aerator is also fitted with an integrated over-seeder, so that reseeding can take place at the same time as aerating the ground. Laying new grass seed while aerating increases the odds of germination for thicker and healthier turf.
As the All-wheel-drive ventrac is rated for slopes of up to 30 degrees and is capable of handling various turf conditions, it allows us to aerate areas previously inaccessible with other aeration tools.
MY720 72” Flail Mower – Fast Cut
this mower deck offers the ability to turn tall or dense areas into a quality finish cut for fast and efficient property management. Flail mowers are a perfect choice for any overgrown area with a variety of different types of vegetation. Add Ventrac’s capabilities to mow difficult areas such as slopes, wet areas, or retention basins and these mowers become game changing.
The Fast Cut Flail features Y knives and it is for a dense or brush- type material application. The Fast Cut is a good choice for areas of overgrown brush and vines that do not require regular mowing, but you still want a better finish result than a typical rotary rough-cut mower.